Search results for “bullet race engineering”

95lb seat pressure at 38.00mm. Coil bind is at 25.50mm - NISSAN A12-A15. High performance dual valve spring set to suit OEM retainers. This spring ...

236°/250° at 0.050" | 109° Lobe Separation | .630"/.630" Valve Lift - Racing cam specifically designed for mid-range throttle response in L98-LS3 e...

 This kit is compatible with all vehicles that use the 5.0L Ford Coyote modular engine including the direct injected 2018+ Mustang GT, 2015-2017 Mu...

272°/278° | 11.00mm/11.00mm Valve Lift - 272°/278° racing cams for engines in the 650-900hp range. Suits high boost and high rpm wide open throttle...

284°/290° | 12.50mm/12.10mm Valve Lift - 284°/290° racing cams to suit well built competition engines with ported head and bigger valves. Turbo siz...

272°/272° | 11.00mm/11.00mm Valve Lift - 272° The best all round performing motorsport cams. Suits racing engines in the 400-650hp range. 54-62mm t...

304/314 Degrees advertised duration, 13.70mm/13.85mm lift - Solid lifter cam for top end HP. This cam suits well built competition engines with lar...

278°-272°/278° | 10.00mm-10.00mm/10.00mm Valve Lift - 278°-272° split lobe design on the inlet. High lift cams for improved port flow and more top ...

294°/300° | 12.50mm/12.10mm Valve Lift - 294°/300° ultimate drag racing cams for all-out high rpm power. To suit high boost engines running methano...

298/288 Degrees advertised duration. 9.52mm/9.15mm lift - Race cams to suit increased compression, ported head etc.

Walbro 525LPH In Tank Fuel Pump to suit standard unleaded fuels & E85. This kit includes the fuel pump, wiring harness & pickup filter. The...

Upgrade or replace your factory RB26 throttles with the Billet PRP Nissan RB26 Individual Throttle Body Kit – a premium direct-fit solution enginee...

280/280 Degrees advertised duration. 11.30mm/10.80mm lift - 3S-GTE Turbo cams for all out drag racing, high RPM, 700HP+ turbo

264°/270° adv., 228°/232° @ 1mm, 11.5mm/10.75mm valve lift - Stage1 performance cams, suited to 500-700hp, 8000rpm and 30psi when matched with our ...

282°/288° | 11.50mm/11.50mm Valve Lift - 282° high HP racing cams to suit well built time attack and drag racing engines. Suits 700hp+ 62mm+ turbo....

272°-268°/268° | 11.30mm-10.50mm/10.50mm Valve Lift - High lift 272° racing cams suitable for most motorsport applications. Suits well built compet...

302/290 Degrees advertised duration. 10.50mm/10.00mm lift - Racing cams to suit high compression, high RPM professionally built competition engine ...

Stem 7mm. Guide OD 11mm. Seal OD 14mm. Viton.

290°/290° | 10.60mm/10.20mm Valve Lift - 290° drag racing cams for wide open throttle and high rpm power. Suits engines running 72mm+ turbocharger....

Platinum Racing Products is proud to announce our revolutionary RB Slimline 2WD Dry sump! We have undertaken this huge project to design, develop, ...

Upgrading to VR38 Coils in your Toyota 1JZ or 2JZ?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

272°/272° | 9.80mm/9.80mm Valve Lift - Stage 2 cams to suit turbocharged engines with 400+hp. Ideal for 58mm-66mm turbo. Requires valve spring upgr...

272 Degree advertised duration, 10.00mm Low lift - These 272 degree high performance camshafts are designed with lower lift for use with the stock ...

CA18 CAM Mech. Fuel & Full Cam & Crank Sensor KitChoose CAS Bracket ColorChoose Mechanical Fuel Pump CAM Bracket Color PLEASE NOTE, the Mec...