Radium Dual Fluid Lock Catch Can Kit, Mitsubishi Evo X

Part Number: 20-1107-FL  |  Brand: Radium Engineering  |  Fitment: 2007-2015 Mitsubishi Evo X

On a performance vehicle, crankcase blow-by is unavoidable — and on a boosted platform like the Evo X, it's amplified. Oil-saturated vapour recirculating back into the intake stream coats the intercooler, fouls the throttle body, and degrades combustion efficiency over time. The Radium Dual Fluid Lock Catch Can Kit (20-1107-FL) addresses both the PCV and CCV circuits simultaneously, keeping your intake clean and your engine protected.

This kit bundles two independent catch can systems — the PCV kit (20-0105) and the CCV kit (20-1106-FL) — into a single purchase. Both are closed-loop systems that do not vent to atmosphere (VTA), making them emissions-compliant and track legal. Clean, filtered air is routed back through the engine to promote negative crankcase pressure for optimal performance, while preventing oil vapours from entering the cabin.

PCV Catch Can Kit — 20-0105

Installs immediately behind the RH headlight, plumbing in-line with the PCV hose. When the PCV valve opens under vacuum, crankcase vapour, unspent fuel, and oil sludge are drawn toward the intake manifold — the catch can intercepts and traps these contaminants before they arrive. Because Radium catch cans are fully pressure-sealed, they are boost-safe with no check valve required. The PCV system is a closed loop requiring a vacuum signal from the intake manifold to open the PCV valve.

NOTE: Some European models fitted with headlamp washer reservoirs may experience interference with the PCV catch can mounting location.

CCV Catch Can Kit — 20-1106-FL

Compatible with all Evo X models and years, including both metal and plastic valve cover variants. Installs immediately behind the LH headlight, plumbing in-line with the CCV hose — the hose that connects the valve cover port to the turbo air intake pipe. Left unaddressed, this circuit draws crankcase vapour and oil sludge directly into the turbocharger compressor and intercooler, reducing intercooler thermal efficiency and degrading performance over time. The CCV kit captures these contaminants before they reach the intake pipe.

This kit was designed for the OEM intake system. If an aftermarket intake is installed, consider purchasing the 20-0300 Alternate Location Mount separately.

Key Features

• Covers both PCV and CCV circuits — complete dual-system protection
• Closed-loop design — no VTA, emissions compliant and track legal
• Large 10AN ORB inlet/outlet ports for unrestricted flow
• 4AN ORB drain port for easy servicing
• 2-step oil separation baffling for maximum catch efficiency
• O-ring sealed dipstick for pressure-safe operation
• Boost-safe — no check valve required
• Compatible with all Evo X models/years (metal and plastic valve cover)

Each Kit Includes

• Billet oil catch can with integrated condenser and dipstick
• Laser cut, powder coated mounting bracket (LH and RH)
• Anodised aluminium hose ends and adapter fittings
• PCV hose — sufficient length for custom routing
• Stainless steel mounting hardware

Vehicle Fitment

• 2007-2015 Mitsubishi Lancer Evolution X (Evo X)

Available Part Numbers

• 20-1107-FL — Dual Fluid Lock Catch Can Kit (PCV + CCV, this listing)
• 20-0105 — PCV Catch Can Kit only
• 20-1106-FL — CCV Catch Can Kit only (Fluid Lock)
• 20-0300 — Alternate Location Mount (for aftermarket intake fitments)

Why Radium Engineering?

Radium Engineering designs and manufactures precision fuel and fluid management components in the USA. Every catch can is CNC machined from billet aluminium, pressure-tested, and engineered for real-world performance and track use. Coore is the authorised Australian distributor — all stock is held locally for fast domestic shipping.

In stock and ready to ship. Backed by Radium Engineering's manufacturer warranty. For fitment questions, contact the Coore team before ordering.

• We endeavour to ship all regular and stocked items on same day, next day or within 5 business days of your order being placed
• Custom orders may take longer than regular shipping times but will have information about shipping time on the listing
• We take extra care in packaging your orders to ensure you quality parts arrive safely
• PRP accepts no responsibility for damage or loss to items/products/services from courier or shipping companies once we have received receipt for the third-party service
• All Items purchased from PRP are to be installed by a qualified mechanic at a licensed workshop
• Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy
• PRP assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use, as all our products are intended for track use only

Refund requests will be reviewed case by case. Due to numerous factors including automatic & immediate 3rd party supplier purchase orders & merchant fees imposed on us, you might be liable to cover an unavoidable restocking/cancellation fee of ≥ 5%. Please review your purchase and consider contacting us for an ETA before placing an order. If your order is for a gearbox, specific turbocharger, engine build, manifold or something generally not in our extensive inventory, this restocking fee is based on the supplier and not dictated by PRP.

• Effective September 2024, refunds will not be provided for change of mind, incorrect choice or custom ordered products.
• Exchanges or refunds for items and customers that are categorized and applicable under the Australian Consumer law, requires the product/s remain unused and returned in original packaging in saleable condition at your expense to our HQ in Australia. They must return in reasonable time. PRP justifies reasonable to 60 days from date of purchase.
• If items are damaged due to courier or otherwise neglect outside of your or PRP's control, you must notify PRP within 14 days of receipt or the claim is void.
• Platinum Racing Products is not liable for refunds or replacements due to lost or stolen property. We will however attempt every effort to assist in the recovery of your goods.
• We reserve the right to offer you a full or partial refund which can be applied over staged or full payment/s within a 30 day period. 
• You agree that if you select "Authority to Leave" or similar, you waive the liability from the shipper (as per their line agreement) and Platinum Racing Products. As such, we strongly suggest sending your package to an address where someone will be available to sign for the goods and keep them secure.
• Anodizing is done in house with state of the art equipment and we hold stock of most popular colour's. We anodize generally within 48hrs. No refund nor partial will be provided if your request is inside the 48hr period and you require urgent parts however we will always do our best to meet your needs.
• There is no partial or full refunds on shipping where factors are outside of PRP's control. Any shipping estimates are to be considered estimates only.
• Silicone Hose Kits: Please note that our silicone hoses have been designed and tested for the vehicle models mentioned. They may fit other vehicles with the same engine model, however the purchase and installation is at your own risk. Due to extensive model changes throughout the years, we are unable to supply or customize hoses in alternative lengths or sizes beyond what is offered. The kits might not contain every hose you want, but we have made every effort to include the series changes to cover the majority of needs. This means we might include hose/s that don't suit your series as a bonus. We strongly advise that you carefully review all photographs provided before making your purchase. PRP does not offer refunds or partial refunds for hoses that are not included in the kit unless they are explicitly shown in the photographs and missing from your delivery.

Warranty Policy

• Warranty is for a full refund or exchange provided the item was purchased through PRP or one its approved resellers or workshops.
• Warranty is void if you tamper with products or bring them back in a different state to which they were sold to you.
• Warranty does NOT cover costs of shipping to and from in any circumstance.
• All Items/Products/Services purchased from Platinum Racing Products are to be installed by a qualified mechanic at an approved workshop and ALL warranty claims are dependent on proof of appropriate installation and verification of failure.
• Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy.
• Platinum Racing Products assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use. All our products are sold and intended for track use only.
• Lifetime warranty refers to certain Platinum Racing Products branded components and generally does not include 3rd party suppliers and their parts. Manufacturer warranty applies to items including but not limited to alternators, turbochargers, electrical sensors, ECUs and associated parts, tyres, etc.
• Due to customer and external components not supplied by PRP, flat drive oil pumps and components are limited to 1 yr warranty with specific cases reviewed before honoring. Spline drive will remain to have lifetime warranty, but again only after specific review.
• All refunds and warranty claims are based on back to base review and parts will need to be returned to HQ for assessment unless otherwise arranged.