Skip to content
WHOLESALE & TRADE LOGIN - CLICK HERE
WHOLESALE & TRADE LOGIN - CLICK HERE

Holinger - 6-Speed GTR Skyline gearbox

Original price $25,245.00 - Original price $27,819.00
Original price
$25,245.00
$25,245.00 - $27,819.00
Current price $25,245.00

All Holinger gearboxes are built to order and entered with a default 12 week lead time. We can adjust this where possible to suit customer’s needs

However currently, in this strange time, we’re certainly not operating under usual conditions and have been completely inundated with orders in the last 6 months. So the reality is most orders are taking between 3-6 months to complete, depending on what it is, and where certain parts are in their production cycle.

Sequential shift dog-change gearbox designed for use in the R32 and R33 Nissan Skyline GTR

Features

  • The gearbox is designed to bolt directly to the Nissan RB Series engine at the front and standard Nissan R32/R33 transfer case at the rear.
  • These transmissions are used with great success in cars with more than 1000hp in drag racing applications.
  • All gears are removable from shafts with an extensive range of ratios available.
  • The gear change is performed by using the standard Nissan gear lever and mechanism. The gear lever is pulled back for up changes and pushed forward for down changes.
  • Clutch splines are normally 1 1/8" x 26, 24/48DP, 30 deg P.A., but can be ordered with standard Nissan splines.
  • Sequential shift gearbox designed for use in the R32 and R33 Nissan Skyline GTR and is suitable for all types of racing.
  • These transmissions are used with great success in cars with more than 1000hp in drag racing applications.
  • The gearbox is designed to bolt directly to the Nissan RB Series engine at the front and standard Nissan R32/R33 transfer case at the rear.
  • The gearbox is fitted with 6 forward gears and a reverse gear.
  • There are two variations for the arrangement of the 6 speeds: 1.1:1 6th gear. 2.1:1 5th gear, with an overdrive 6th gear.
  • All gears are removable from shafts with an extensive range of ratios available.
  • Gear engagement is performed by non-synchronised face dogs. 
  • The gear change is performed by using the standard Nissan gear lever and mechanism.
  • The gear lever is pulled back for up changes and pushed forward for down changes.
  • Neutral is selected from 1st gear position by moving the gear lever to the left and forward.
  • The reverse is selected from the neutral position by pushing the gear lever forward. From reverse gear, neutral is selected by pulling the gear lever back and 1st is selected by pulling the gear lever back again.
  • This system prevents neutral or reverses from being accidentally selected when in the forward gear pattern. 
  • A gear position sensor is supplied for interfacing with an electronic dash display. Alternatively, a stand-alone gear indicator display is available for cars not fitted with an electronic dash.
  • Case hardened nickel chrome steel is used for all gears and shafts. • The selector forks are aluminium bronze.
  • Casings are sandcast Aluminium alloy, heat-treated to T6 specifications.
  • Clutch splines are normally 1 1/8” x 26, 24/48DP, 30 deg P.A., but can be ordered with standard Nissan splines.
  • The gearbox weight is 46kgs (102lbs).

We need the following information to make sure we have the right spec’s for your application:

  • TOP SPEED
  • MAX RPM
  • TYRE SIZE
  • DIFF RATIO
  • APPLICATION

Please note if you going to put this into an R33 GT-R, this gearbox uses only 26 spline versions. This also requires the R32 Push Clutch components to make it work with an R33 GT-R