FPG Nissan Skyline R32 R33 R34 C34 Stagea A/C Air Conditioning Replacement Kit R134A FPG-039

Another much needed FPG creation!

More models have been developed, tested and manufactured. Kits are now available for:

R32 (all models/years)

R33 (all models, 1994-1996) (evaporator fittings: ID of Suction Port 14mm and ID of Hi Pressure Port 7mm)

R33 (all models, 1997-1998) (evaporator fittings: ID of Suction Port 18mm and ID of Hi Pressure Port 10mm)

R34 (all models/years)

C34 Stagea (all models/years)

Key features:

-No drilling, no cutting, no pulling half the car apart!

-This kit covers the system from the firewall fittings forward. No under-dash or electronic components are included. It will fit and work with the OEM evaporator. Make sure your evaporator and Tx valve are clean and in good working order.

-Billet aluminium compressor mounting bracket and spacers, high tensile hardware

-Compact, Denso compressor (Found on Toyota Echo 1999-2005) with side mounted lines, ideal for big turbo setups and twin gate manifolds requiring more space

-Fits all RB combinations (20, 25, 26, 30, 25/30, 26/30..!)

-New custom made tensioner for accurate belt alignment and tension

-CNC machined ends and shaped hardlines to relocate the rubber hoses away from the hot areas

-Smaller OD hoses for a cleaner and more compact look, quality USA made fittings that are easy to crimp on (all R134A approved components, lines will come assembled in the kit)

-SPAL 11" Pusher fan, providing more cooling performance and more space for bigger intercoolers. will fit 6" thick intercoolers, and pushes a lot more air than the old fans do.

-Built-in dryer allowing plenty of space for steering cooler and/or extra oil coolers at the front. Dryer element can be replaced/serviced.

-Trinary pressure switch protecting the system from over pressure and loss of gas. Mid point allows the fan to be triggered automatically.

****The Stagea and R34 (non GTR) use a 3 wire pressure sensor and will need to be reused. If your car has a 4 wire pressure switch (R33 and R34GTR) you can also reuse your pressure switch or order a new one with your kit (link to purchase here). The R32 will need a 4 wire pressure switch and is automatically included in the kit****

-The system will need the "Ambient Temperature" sensor to remain installed. It is usually located on the factory fan frame, or on the radiator support. If you do not plug it back in, the climate control unit will not send the a/c request to the engine ECU. (This is a common mistake made by installers and can save you a lot of time trying to fault find).

-Modern multi-flow condenser, smaller footprint with better performance mounted in a custom made aluminium frame

-Custom made fittings for an easy install and reliable setup

-Charge ports are easy to access and away from the hot areas

-Will work with all balancer types, and it is recommended to not engage the compressor clutch at higher rpms (engine ecu triggers the a/c clutch) for component longevity on overdrive balancers. Set up a table in the ecu to control those parameters 

-Diagram below (also located in the "instructions" section of the website) is to add the fan wiring relay to the R32. The later models (33 and 34) will use the factory fan wiring as it is already there.

-We've made the compressor available as an add-on as it may be beneficial for the customer to purchase it locally to save on freight and for manufacturer's warranty. We cannot warrant components that we do not make.

-This system needs to be checked and charged by a licensed professional as per your country's rules and regulations. The system takes around 550g or R134A, but your installer's experience and tooling will confirm what is required.

-Belt size will depend on your balancer and engine model. OEM RB26 balancer will use a 4PK860. Other known belt sizes are:

Large (1000hp) ATI Balancer 4PK910

Small (500hp) ATI Balancer 4PK850

FluidDampr Balancer 4PK860

***Due to the volume of interest in this product and the difficulty in sourcing certain components, it may take a few weeks to ship the kit out. We will keep customers informed if there are any delays***

***More photos and videos coming soon)***

• We endeavour to ship all regular and stocked items on same day, next day or within 5 business days of your order being placed
• Custom orders may take longer than regular shipping times but will have information about shipping time on the listing
• We take extra care in packaging your orders to ensure you quality parts arrive safely
• PRP accepts no responsibility for damage or loss to items/products/services from courier or shipping companies once we have received receipt for the third-party service
• All Items purchased from PRP are to be installed by a qualified mechanic at a licensed workshop
• Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy
• PRP assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use, as all our products are intended for track use only

Refund requests will be reviewed case by case. Due to numerous factors including automatic & immediate 3rd party supplier purchase orders & merchant fees imposed on us, you might be liable to cover an unavoidable restocking/cancellation fee of ≥ 5%. Please review your purchase and consider contacting us for an ETA before placing an order. If your order is for a gearbox, specific turbocharger, engine build, manifold or something generally not in our extensive inventory, this restocking fee is based on the supplier and not dictated by PRP.

• Effective September 2024, refunds will not be provided for change of mind, incorrect choice or custom ordered products.
• Exchanges or refunds for items and customers that are categorized and applicable under the Australian Consumer law, requires the product/s remain unused and returned in original packaging in saleable condition at your expense to our HQ in Australia. They must return in reasonable time. PRP justifies reasonable to 60 days from date of purchase.
• If items are damaged due to courier or otherwise neglect outside of your or PRP's control, you must notify PRP within 14 days of receipt or the claim is void.
• Platinum Racing Products is not liable for refunds or replacements due to lost or stolen property. We will however attempt every effort to assist in the recovery of your goods.
• We reserve the right to offer you a full or partial refund which can be applied over staged or full payment/s within a 30 day period. 
• You agree that if you select "Authority to Leave" or similar, you waive the liability from the shipper (as per their line agreement) and Platinum Racing Products. As such, we strongly suggest sending your package to an address where someone will be available to sign for the goods and keep them secure.
• Anodizing is done in house with state of the art equipment and we hold stock of most popular colour's. We anodize generally within 48hrs. No refund nor partial will be provided if your request is inside the 48hr period and you require urgent parts however we will always do our best to meet your needs.
• There is no partial or full refunds on shipping where factors are outside of PRP's control. Any shipping estimates are to be considered estimates only.
• Silicone Hose Kits: Please note that our silicone hoses have been designed and tested for the vehicle models mentioned. They may fit other vehicles with the same engine model, however the purchase and installation is at your own risk. Due to extensive model changes throughout the years, we are unable to supply or customize hoses in alternative lengths or sizes beyond what is offered. The kits might not contain every hose you want, but we have made every effort to include the series changes to cover the majority of needs. This means we might include hose/s that don't suit your series as a bonus. We strongly advise that you carefully review all photographs provided before making your purchase. PRP does not offer refunds or partial refunds for hoses that are not included in the kit unless they are explicitly shown in the photographs and missing from your delivery.

Warranty Policy

• Warranty is for a full refund or exchange provided the item was purchased through PRP or one its approved resellers or workshops.
• Warranty is void if you tamper with products or bring them back in a different state to which they were sold to you.
• Warranty does NOT cover costs of shipping to and from in any circumstance.
• All Items/Products/Services purchased from Platinum Racing Products are to be installed by a qualified mechanic at an approved workshop and ALL warranty claims are dependent on proof of appropriate installation and verification of failure.
• Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy.
• Platinum Racing Products assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use. All our products are sold and intended for track use only.
• Lifetime warranty refers to certain Platinum Racing Products branded components and generally does not include 3rd party suppliers and their parts. Manufacturer warranty applies to items including but not limited to alternators, turbochargers, electrical sensors, ECUs and associated parts, tyres, etc.
• Due to customer and external components not supplied by PRP, flat drive oil pumps and components are limited to 1 yr warranty with specific cases reviewed before honoring. Spline drive will remain to have lifetime warranty, but again only after specific review.
• All refunds and warranty claims are based on back to base review and parts will need to be returned to HQ for assessment unless otherwise arranged.