AFIS | Gen2 250lb/hr (2350cc) Injectors

• AFIS – Gen 2 250 lb/hr Fuel Injectors
  Flow Matched | Stainless Steel Construction | Low Impedance | EV1 Connector

  The AFIS Gen2 250 lb/hr Injectors are engineered for extreme-performance applications where consistent fuel delivery, durability, and tuning stability are critical. Compatible with pump gas, race fuel, methanol, and ethanol (E85), these injectors support a wide range of high-horsepower builds. Because pump and race fuel formulas can vary, AFIS encourages customers to call for verification to ensure optimal compatibility with your specific setup.

  Designed as the ultimate replacement for Siemens DEKA injectors, the AFIS Gen2 series offers superior construction quality, improved corrosion resistance, and more consistent flow—making them the go-to upgrade for builders wanting increased reliability without changing connectors or layout.

  Each injector features a one-piece, no–internal–O-ring design, delivering OEM-grade reliability and eliminating common failure points found in multi-piece injector bodies. The stainless steel construction ensures exceptional corrosion protection and long service life, especially in alcohol-based fuel environments.

  With a standard 1.85" body length, EV1 connector, and low-impedance (peak & hold) configuration, these injectors integrate seamlessly into existing systems. Published flow data uses the industry-standard 43.5 psi (3 bar) pressure reference, providing honest, credible numbers you can tune around confidently. Every set is precision flow-matched, improving cylinder-to-cylinder consistency, power production, and engine safety.

  Thanks to excellent idle characteristics and linear operation up to 97% duty cycle, these injectors offer exceptional flexibility, delivering stable fueling from low-load cruising to full-throttle demand. Backed by a Limited Lifetime Warranty, they offer long-term confidence for demanding builders and tuners.

  Key Features:

  • 250 lb/hr flow rating (43.5 PSI / 3 bar industry-standard data)

  • Ultimate replacement for Siemens DEKA injectors

  • Compatible with pump gas, race fuel, methanol, and E85

    • Call for verification on pump/race gas setups

  • One-piece design with no internal O-rings

  • Stainless steel construction for maximum corrosion resistance

  • Standard 1.85" body, EV1 connector, low impedance (peak & hold)

  • Injector sets are precision flow matched

  • Smooth idle and excellent low-speed drivability

  • Linear operation to 97% duty cycle

  • Limited Lifetime Warranty

  High flow, high precision, and high durability—AFIS Gen2 Injectors deliver unmatched performance and are the perfect upgrade over Siemens DEKA units for serious street, race, and motorsport builds.

250 lb/hr

• 98 RON: 2,625 cc/min

• E85: 2,450 cc/min

• Methanol: 1,975 cc/min

• Average: ⭐ 2,350 cc/min

• We endeavour to ship all regular and stocked items on same day, next day or within 5 business days of your order being placed
• Custom orders may take longer than regular shipping times but will have information about shipping time on the listing
• We take extra care in packaging your orders to ensure you quality parts arrive safely
• PRP accepts no responsibility for damage or loss to items/products/services from courier or shipping companies once we have received receipt for the third-party service
• All Items purchased from PRP are to be installed by a qualified mechanic at a licensed workshop
• Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy
• PRP assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use, as all our products are intended for track use only

Refund requests will be reviewed case by case. Due to numerous factors including automatic & immediate 3rd party supplier purchase orders & merchant fees imposed on us, you might be liable to cover an unavoidable restocking/cancellation fee of ≥ 5%. Please review your purchase and consider contacting us for an ETA before placing an order. If your order is for a gearbox, specific turbocharger, engine build, manifold or something generally not in our extensive inventory, this restocking fee is based on the supplier and not dictated by PRP.

• Effective September 2024, refunds will not be provided for change of mind, incorrect choice or custom ordered products.
• Exchanges or refunds for items and customers that are categorized and applicable under the Australian Consumer law, requires the product/s remain unused and returned in original packaging in saleable condition at your expense to our HQ in Australia. They must return in reasonable time. PRP justifies reasonable to 60 days from date of purchase.
• If items are damaged due to courier or otherwise neglect outside of your or PRP's control, you must notify PRP within 14 days of receipt or the claim is void.
• Platinum Racing Products is not liable for refunds or replacements due to lost or stolen property. We will however attempt every effort to assist in the recovery of your goods.
• We reserve the right to offer you a full or partial refund which can be applied over staged or full payment/s within a 30 day period. 
• You agree that if you select "Authority to Leave" or similar, you waive the liability from the shipper (as per their line agreement) and Platinum Racing Products. As such, we strongly suggest sending your package to an address where someone will be available to sign for the goods and keep them secure.
• Anodizing is done in house with state of the art equipment and we hold stock of most popular colour's. We anodize generally within 48hrs. No refund nor partial will be provided if your request is inside the 48hr period and you require urgent parts however we will always do our best to meet your needs.
• There is no partial or full refunds on shipping where factors are outside of PRP's control. Any shipping estimates are to be considered estimates only.
• Silicone Hose Kits: Please note that our silicone hoses have been designed and tested for the vehicle models mentioned. They may fit other vehicles with the same engine model, however the purchase and installation is at your own risk. Due to extensive model changes throughout the years, we are unable to supply or customize hoses in alternative lengths or sizes beyond what is offered. The kits might not contain every hose you want, but we have made every effort to include the series changes to cover the majority of needs. This means we might include hose/s that don't suit your series as a bonus. We strongly advise that you carefully review all photographs provided before making your purchase. PRP does not offer refunds or partial refunds for hoses that are not included in the kit unless they are explicitly shown in the photographs and missing from your delivery.

Warranty Policy

• Warranty is for a full refund or exchange provided the item was purchased through PRP or one its approved resellers or workshops.
• Warranty is void if you tamper with products or bring them back in a different state to which they were sold to you.
• Warranty does NOT cover costs of shipping to and from in any circumstance.
• All Items/Products/Services purchased from Platinum Racing Products are to be installed by a qualified mechanic at an approved workshop and ALL warranty claims are dependent on proof of appropriate installation and verification of failure.
• Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy.
• Platinum Racing Products assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use. All our products are sold and intended for track use only.
• Lifetime warranty refers to certain Platinum Racing Products branded components and generally does not include 3rd party suppliers and their parts. Manufacturer warranty applies to items including but not limited to alternators, turbochargers, electrical sensors, ECUs and associated parts, tyres, etc.
• Due to customer and external components not supplied by PRP, flat drive oil pumps and components are limited to 1 yr warranty with specific cases reviewed before honoring. Spline drive will remain to have lifetime warranty, but again only after specific review.
• All refunds and warranty claims are based on back to base review and parts will need to be returned to HQ for assessment unless otherwise arranged.