Radium PCV Fluid Lock Catch Can Kit, Subaru WRX VB (2022+)

The Radium Engineering 20-0754-FL PCV Fluid Lock Catch Can Kit is a purpose-built positive crankcase ventilation solution for the Subaru WRX VB (2022+). Running inline between the PCV valve and the intake manifold, this kit intercepts oil-saturated crankcase vapour before it re-enters the engine — protecting the FA24F engine from oil contamination during idle, cruise, and deceleration.

The catch can mounts to threaded bosses on the ABS unit using factory holes — no cutting, drilling, or permanent modifications required. The kit is a closed-loop design — it does not vent to atmosphere (VTA), making it emissions compliant and track legal. No extra inline check valve is required — Radium catch cans are pressure sealed.

Note: This kit addresses the PCV side only. It does not address blow-by from the CCV side of the crankcase. For complete coverage, pair with the Radium 20-0755-FL CCV Catch Can Kit, or see the Radium 20-0756-FL Dual Kit for both circuits in one purchase.

PCV Circuit

The PCV catch can runs inline between the PCV valve and the intake manifold. When intake manifold pressure is near or above atmospheric (under boost), the PCV check valve closes and this circuit experiences no flow. Under idle, steady-state cruise, and deceleration, the PCV hose experiences metered vacuum — conditions that would normally draw crankcase vapour, unspent fuel, and oil sludge directly into the intake manifold immediately after a high-load run. The Radium catch can captures these contaminants and routes clean filtered air back into the engine, promoting negative crankcase pressure for optimal performance and preventing oil vapours from entering the cabin.

Key Features

• PCV circuit coverage — inline between PCV valve and intake manifold
• Fluid Lock design — prevents fluid from draining back into the engine when the can is full
• Large 10AN ORB ports — maximise flow and minimise restriction
• 4AN ORB drain port — easy, clean draining without removing the can
• 2-step oil separation baffling — highly effective at separating oil mist from blow-by vapour
• O-ring sealed dipstick — check fluid level without opening the system
• Closed-loop system — emissions compliant and track legal, no VTA
• WRX VB-specific mounting bracket — mounts to ABS unit threaded bosses using factory holes
• Pressure sealed — no extra inline check valve required
• No permanent modifications required — no cutting or drilling

Kit Includes

• Baffled oil catch can (Fluid Lock)
• WRX VB-specific mounting bracket
• 12AN adapter fittings and hose ends
• 3/4" PCV hose
• Stainless steel hardware

Vehicle Fitment

• 2022+ Subaru WRX (VB) — FA24F

Available Part Numbers

• 20-0754-FL — PCV Fluid Lock Catch Can Kit, Subaru WRX VB 2022+ (PCV side only)
• 20-0755-FL — CCV Fluid Lock Catch Can Kit, Subaru WRX VB 2022+ (sold separately)
• 20-0756-FL — Dual Fluid Lock Catch Can Kit, Subaru WRX VB 2022+ (CCV + PCV, sold separately)

Why Radium Engineering?

• ✔ Designed and manufactured in the USA
• ✔ CNC machined billet aluminium — precision fit, no compromise
• ✔ Closed-loop, track-legal design — no VTA
• ✔ Trusted by professional motorsport teams and serious enthusiasts worldwide
• ✔ Exclusively distributed in Australia by Coore

Genuine Radium Engineering product. Stocked in Sydney for fast Australian delivery. PCV side only — does not address CCV blow-by. Pair with 20-0755-FL CCV Kit or see 20-0756-FL Dual Kit for complete coverage. Professional installation recommended. No permanent vehicle modifications required.

• We endeavour to ship all regular and stocked items on same day, next day or within 5 business days of your order being placed
• Custom orders may take longer than regular shipping times but will have information about shipping time on the listing
• We take extra care in packaging your orders to ensure you quality parts arrive safely
• PRP accepts no responsibility for damage or loss to items/products/services from courier or shipping companies once we have received receipt for the third-party service
• All Items purchased from PRP are to be installed by a qualified mechanic at a licensed workshop
• Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy
• PRP assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use, as all our products are intended for track use only

Refund requests will be reviewed case by case. Due to numerous factors including automatic & immediate 3rd party supplier purchase orders & merchant fees imposed on us, you might be liable to cover an unavoidable restocking/cancellation fee of ≥ 5%. Please review your purchase and consider contacting us for an ETA before placing an order. If your order is for a gearbox, specific turbocharger, engine build, manifold or something generally not in our extensive inventory, this restocking fee is based on the supplier and not dictated by PRP.

• Effective September 2024, refunds will not be provided for change of mind, incorrect choice or custom ordered products.
• Exchanges or refunds for items and customers that are categorized and applicable under the Australian Consumer law, requires the product/s remain unused and returned in original packaging in saleable condition at your expense to our HQ in Australia. They must return in reasonable time. PRP justifies reasonable to 60 days from date of purchase.
• If items are damaged due to courier or otherwise neglect outside of your or PRP's control, you must notify PRP within 14 days of receipt or the claim is void.
• Platinum Racing Products is not liable for refunds or replacements due to lost or stolen property. We will however attempt every effort to assist in the recovery of your goods.
• We reserve the right to offer you a full or partial refund which can be applied over staged or full payment/s within a 30 day period. 
• You agree that if you select "Authority to Leave" or similar, you waive the liability from the shipper (as per their line agreement) and Platinum Racing Products. As such, we strongly suggest sending your package to an address where someone will be available to sign for the goods and keep them secure.
• Anodizing is done in house with state of the art equipment and we hold stock of most popular colour's. We anodize generally within 48hrs. No refund nor partial will be provided if your request is inside the 48hr period and you require urgent parts however we will always do our best to meet your needs.
• There is no partial or full refunds on shipping where factors are outside of PRP's control. Any shipping estimates are to be considered estimates only.
• Silicone Hose Kits: Please note that our silicone hoses have been designed and tested for the vehicle models mentioned. They may fit other vehicles with the same engine model, however the purchase and installation is at your own risk. Due to extensive model changes throughout the years, we are unable to supply or customize hoses in alternative lengths or sizes beyond what is offered. The kits might not contain every hose you want, but we have made every effort to include the series changes to cover the majority of needs. This means we might include hose/s that don't suit your series as a bonus. We strongly advise that you carefully review all photographs provided before making your purchase. PRP does not offer refunds or partial refunds for hoses that are not included in the kit unless they are explicitly shown in the photographs and missing from your delivery.

Warranty Policy

• Warranty is for a full refund or exchange provided the item was purchased through PRP or one its approved resellers or workshops.
• Warranty is void if you tamper with products or bring them back in a different state to which they were sold to you.
• Warranty does NOT cover costs of shipping to and from in any circumstance.
• All Items/Products/Services purchased from Platinum Racing Products are to be installed by a qualified mechanic at an approved workshop and ALL warranty claims are dependent on proof of appropriate installation and verification of failure.
• Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy.
• Platinum Racing Products assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use. All our products are sold and intended for track use only.
• Lifetime warranty refers to certain Platinum Racing Products branded components and generally does not include 3rd party suppliers and their parts. Manufacturer warranty applies to items including but not limited to alternators, turbochargers, electrical sensors, ECUs and associated parts, tyres, etc.
• Due to customer and external components not supplied by PRP, flat drive oil pumps and components are limited to 1 yr warranty with specific cases reviewed before honoring. Spline drive will remain to have lifetime warranty, but again only after specific review.
• All refunds and warranty claims are based on back to base review and parts will need to be returned to HQ for assessment unless otherwise arranged.