{"product_id":"radium-fuel-pump-hanger-mazda-mx-5-na-nb-89-05-20-1020","title":"Radium Fuel Pump Hanger - Mazda MX-5 NA\/NB 89-05","description":"\u003cp\u003eThis fuel hanger completely replaces the factory in-tank fuel pump module and allows 1 or 2 aftermarket pumps to be used. The OEM fuel level sensor is reused. No modifications are required for fitment under the fuel pump access cover.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eFUEL PUMP COMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eAEM 50-1200\u003c\/li\u003e \t\u003cli\u003eWalbro GSS342\u003c\/li\u003e \t\u003cli\u003eWalbro F90000267\u003c\/li\u003e \t\u003cli\u003eWalbro F90000274\u003c\/li\u003e \t\u003cli\u003eWalbro F90000285\u003c\/li\u003e \t\u003cli\u003e*Ti Automotive E5LM\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eNOTES:\u003c\/p\u003e  \u003col\u003e \t\u003cli\u003eThere many other compatible pumps not listed. The pump must have a 39mm outer diameter. \u003c\/li\u003e \t\u003cli\u003eThere will be enough components included to use 1 or 2 fuel pumps, as shown above. \u003c\/li\u003e \t\u003cli\u003e*The Ti Automotive E5LM pump does NOT have an integrated check valve. If staging 2 of them, consider 20-0798.  \u003c\/li\u003e \u003c\/ol\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNOTES ABOUT FUEL STARVATION PROTECTION\u003c\/strong\u003e\u003c\/p\u003e  \u003col\u003e \t\u003cli\u003eAlthough not very effective, the OEM internal fuel tank baffle is still used.\u003c\/li\u003e \t\u003cli\u003eThe 1-piece anodized aluminum collector box keeps fuel trapped around the pump inlet(s). \u003c\/li\u003e \t\u003cli\u003eThere are two 1-way fill valves incorporated in the bottom of the collector box that allows fuel in, but not out. Each 1-way fill valve flows 355 LPH. \u003c\/li\u003e \t\u003cli\u003eAs shown below, the collector box is constantly replenished with fuel returning from the pressure regulator. \u003c\/li\u003e \u003c\/ol\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNOTES ABOUT PORTS AND FITTINGS\u003c\/strong\u003e\u003c\/p\u003e  \u003col\u003e \t\u003cli\u003eThe \"PUMP OUT\" port is tapped with 7\/8\"-14 (10AN ORB) threads. \t\u003cul\u003e \t\t\u003cli\u003ea. Provided is an SAE quick connect hose end with barbs (shown below) for 89-97 MX-5 fuel lines. \u003c\/li\u003e \t\t\u003cli\u003eb. Provided is a 10AN ORB to SAE quick connect banjo fitting for 99-05 MX-5 fuel lines.\u003c\/li\u003e \t\t\u003cli\u003ec. Additional 10AN ORB adapters fittings can be found separately. \u003c\/li\u003e \t\u003c\/ul\u003e \t\u003c\/li\u003e \t\u003cli\u003eThe \"FUEL RETURN\" port is tapped with 3\/4\"-16 (8AN ORB) threads. \t\u003cul\u003e \t\t\u003cli\u003ea. Provided is an SAE quick connect hose end with barbs (shown above) for 89-97 MX-5 fuel lines. \u003c\/li\u003e \t\t\u003cli\u003eb. Provided is an 8AN ORB to SAE quick connect banjo fitting for 99-05 MX-5 fuel lines.\u003c\/li\u003e \t\t\u003cli\u003ec. Additional 8AN ORB adapters fittings can be found separately\u003c\/li\u003e \t\u003c\/ul\u003e \t\u003c\/li\u003e \u003c\/ol\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNOTES ABOUT FUEL TANK VARIATIONS\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eThere are multiple fuel tank changes between the 89-05 MX-5. Anodized billet aluminum extension brackets (shown below) with distinct mounting configurations permit compatibility with all fuel tank variations. To retain the different OEM fuel level sensors, an extension mount (shown above) is provided for the later models that have deeper fuel tanks.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNOTES ABOUT FUEL PRESSURE REGULATOR\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003eWhen installing the pump hanger into a 89-97 MX-5, the OEM fuel pressure regulator is retained. This is mounted on the fuel rail and has no direct correlation with the fuel pump hanger. When installing the pump hanger into a 99-05 MX-5, the OEM fuel pressure regulator will be removed from the system. An aftermarket FPR is required for these vehicles. There are 2 plug and play options: \u003c\/p\u003e  \u003col\u003e \t\u003cli\u003e20-1022 FPR KIT, 99-05 MAZDA MX-5 found \u003ca href=\"https:\/\/www.prospeedracing.com.au\/Radium-FPR-RA-Fuel-Pressure-Regulator-Kit-Mazda-MX-5-NB-99-05-20-1022\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e \t\u003cli\u003eFUEL HANGER PLUMBING KIT, 89-05 MX-\u003c\/li\u003e \u003c\/ol\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNOTES ABOUT FILTRATION\u003c\/strong\u003e\u003c\/p\u003e  \u003col\u003e \t\u003cli\u003eThis system includes multiple pre-pump filters for all pumps.\u003c\/li\u003e \t\u003cli\u003eThis system does NOT eliminate the OEM \"post\" pump fuel filter.\u003c\/li\u003e \u003c\/ol\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eNOTES ABOUT WIRING\u003c\/strong\u003e\u003c\/p\u003e  \u003col\u003e \t\u003cli\u003eDepending on the fuel pump and fuel pressure, some single pump installations can re-use the OEM wiring.\u003c\/li\u003e \t\u003cli\u003eIt is recommended to upgrade the wiring to ensure the pump(s) are operating at their full potential.\u003c\/li\u003e \t\u003cli\u003eUniversal fuel pump wiring kits can be found HERE. Select one for each aftermarket fuel pump used.\u003c\/li\u003e \t\u003cli\u003eThe in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/li\u003e \t\u003cli\u003eThe stainless steel terminals easily handle the high current demand that compact bulkhead connectors lack.\u003c\/li\u003e \t\u003cli\u003eServiceable connections are hermetically sealed and impervious to all standard and exotic fuels.\u003c\/li\u003e \t\u003cli\u003eNon-conductive anodized aluminum acorn nuts (shown below) prevent accidental short circuiting.\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \t\u003cli\u003e1989-1997 Mazda MX-5 NA\u003c\/li\u003e \t\u003cli\u003e1998-2005 Mazda MX-5 NB\u003c\/li\u003e \u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":46281896165608,"sku":"20-1020","price":1097.9,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0354\/8135\/4376\/files\/20-1020_39d81f13-3df9-4c5e-a009-5878fbf65d18.jpg?v=1751601613","url":"https:\/\/www.platinumracingproducts.com\/ms-sg\/products\/radium-fuel-pump-hanger-mazda-mx-5-na-nb-89-05-20-1020","provider":"Platinum Racing Products","version":"1.0","type":"link"}