Skip to content
PRP USA
CONTACT SALES: +61 2 5500 7523

V2 RB26 6 throttle drive by wire system

Original price $1,593.91 - Original price $1,593.91
Original price
$1,593.91
$1,593.91 - $1,593.91
Current price $1,593.91

In 2018 Dahtone designed the first commercially available drive by wire system for the OEM RB26 6 throttle body inlet. After 4 years and a combined 100,000km of road and race use they decided that it was time to update the system.


The V2 system now uses a Bosch based billet aluminium throttle actuator that has built in throttle position sensors. There is no need for any extra sensors, brackets, wires or connectors, everything functions just like a Bosch single throttle body would.

TPS tracking is perfect and max current draw is under 4 Amps, which means there is no need for any external control boxes or half bridge modules. It will work on any ECU that can run a Bosch drive by wire throttle body.

The system works with any 6 throttle inlet manifold (OEM, Nismo, Plazmaman, Hypertune or even N/A with velocity stacks) without the need for any extra parts.
It also fits with the OEM oil cooler/filter block assembly.

Dahtone build cars first and foremost not just parts so we know what works and what doesn't in the real world. Buy from the innovators not the imitators.


Parts Included

  • 1 x Bosch based billet aluminium drive by wire actuator
  • 1 x New Genuine Nissan throttle linkage
  • 1 x Throttle shaft joiner
  • 1 x Throttle shaft joiner with integrated linkage arm
  • 1 x Throttle actuator arm
  • 1 x Throttle actuator plug and pin kit
  • 1 x Throttle actuator bracket
  • 2 x weld in bungs ( 1/8 npt and 1/4 npt)
  • Stainless fasteners
  • Install guide is downloadable at the link below. ( Updated 05/06/2022 )

https://drive.google.com/file/d/1bybn0e9KCGP83UAXhV-Q_ZI6SDBtzsZF/view?usp=sharing

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Aaron m.
Umm?

It's what I've been looking for, looks like I can get both hands on the oil filter? Is it every thing I need? or do I need something else to finish off the intake side? thanks for the new parts, here is my car, had to pull it apart because no. 3 piston big end bearing froze?? luckily it was one bearing but alot of work.

Vehicle Model Compatibility

Nissan Skyline R32 GTR
Nissan Skyline R33 GTR
Nissan Skyline R34 GTR

Engine Model Compatability

Nissan RB26DETT