{"product_id":"radium-pcv-fluid-lock-catch-can-kit-subaru-wrx-vb-22","title":"Radium PCV Fluid Lock Catch Can Kit, Subaru WRX VB (2022+)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering 20-0754-FL PCV Fluid Lock Catch Can Kit\u003c\/strong\u003e is a purpose-built positive crankcase ventilation solution for the Subaru WRX VB (2022+). Running inline between the PCV valve and the intake manifold, this kit intercepts oil-saturated crankcase vapour before it re-enters the engine — protecting the FA24F engine from oil contamination during idle, cruise, and deceleration.\u003c\/p\u003e\n\n\u003cp\u003eThe catch can mounts to threaded bosses on the ABS unit using factory holes — no cutting, drilling, or permanent modifications required. The kit is a \u003cstrong\u003eclosed-loop design\u003c\/strong\u003e — it does not vent to atmosphere (VTA), making it emissions compliant and track legal. No extra inline check valve is required — Radium catch cans are pressure sealed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit addresses the PCV side only. It does not address blow-by from the CCV side of the crankcase. For complete coverage, pair with the \u003cstrong\u003eRadium 20-0755-FL CCV Catch Can Kit\u003c\/strong\u003e, or see the \u003cstrong\u003eRadium 20-0756-FL Dual Kit\u003c\/strong\u003e for both circuits in one purchase.\u003c\/p\u003e\n\n\u003chr style=\"margin: 20px 0; border: 0; border-top: 1px solid #000;\"\u003e\n\n\u003ch3\u003ePCV Circuit\u003c\/h3\u003e\n\u003cp\u003eThe PCV catch can runs inline between the PCV valve and the intake manifold. When intake manifold pressure is near or above atmospheric (under boost), the PCV check valve closes and this circuit experiences no flow. Under idle, steady-state cruise, and deceleration, the PCV hose experiences metered vacuum — conditions that would normally draw crankcase vapour, unspent fuel, and oil sludge directly into the intake manifold immediately after a high-load run. The Radium catch can captures these contaminants and routes clean filtered air back into the engine, promoting negative crankcase pressure for optimal performance and preventing oil vapours from entering the cabin.\u003c\/p\u003e\n\n\u003chr style=\"margin: 20px 0; border: 0; border-top: 1px solid #000;\"\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePCV circuit coverage\u003c\/strong\u003e — inline between PCV valve and intake manifold\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFluid Lock design\u003c\/strong\u003e — prevents fluid from draining back into the engine when the can is full\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLarge 10AN ORB ports\u003c\/strong\u003e — maximise flow and minimise restriction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4AN ORB drain port\u003c\/strong\u003e — easy, clean draining without removing the can\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-step oil separation baffling\u003c\/strong\u003e — highly effective at separating oil mist from blow-by vapour\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eO-ring sealed dipstick\u003c\/strong\u003e — check fluid level without opening the system\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClosed-loop system\u003c\/strong\u003e — emissions compliant and track legal, no VTA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWRX VB-specific mounting bracket\u003c\/strong\u003e — mounts to ABS unit threaded bosses using factory holes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure sealed\u003c\/strong\u003e — no extra inline check valve required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo permanent modifications required\u003c\/strong\u003e — no cutting or drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr style=\"margin: 20px 0; border: 0; border-top: 1px solid #000;\"\u003e\n\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBaffled oil catch can (Fluid Lock)\u003c\/li\u003e\n  \u003cli\u003eWRX VB-specific mounting bracket\u003c\/li\u003e\n  \u003cli\u003e12AN adapter fittings and hose ends\u003c\/li\u003e\n  \u003cli\u003e3\/4\" PCV hose\u003c\/li\u003e\n  \u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr style=\"margin: 20px 0; border: 0; border-top: 1px solid #000;\"\u003e\n\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2022+ Subaru WRX (VB) — FA24F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr style=\"margin: 20px 0; border: 0; border-top: 1px solid #000;\"\u003e\n\n\u003ch3\u003eAvailable Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-0754-FL\u003c\/strong\u003e — PCV Fluid Lock Catch Can Kit, Subaru WRX VB 2022+ (PCV side only)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-0755-FL\u003c\/strong\u003e — CCV Fluid Lock Catch Can Kit, Subaru WRX VB 2022+ (sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-0756-FL\u003c\/strong\u003e — Dual Fluid Lock Catch Can Kit, Subaru WRX VB 2022+ (CCV + PCV, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr style=\"margin: 20px 0; border: 0; border-top: 1px solid #000;\"\u003e\n\n\u003ch3\u003eWhy Radium Engineering?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e✔ Designed and manufactured in the USA\u003c\/li\u003e\n  \u003cli\u003e✔ CNC machined billet aluminium — precision fit, no compromise\u003c\/li\u003e\n  \u003cli\u003e✔ Closed-loop, track-legal design — no VTA\u003c\/li\u003e\n  \u003cli\u003e✔ Trusted by professional motorsport teams and serious enthusiasts worldwide\u003c\/li\u003e\n  \u003cli\u003e✔ Exclusively distributed in Australia by Coore\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eGenuine Radium Engineering product. Stocked in Sydney for fast Australian delivery. PCV side only — does not address CCV blow-by. Pair with 20-0755-FL CCV Kit or see 20-0756-FL Dual Kit for complete coverage. Professional installation recommended. No permanent vehicle modifications required.\u003c\/em\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":48591095857384,"sku":"20-0754-FL","price":329.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0354\/8135\/4376\/files\/20-0754-FL_6d0186ff-1bae-4ac8-8f95-313372979829.jpg?v=1779942791","url":"https:\/\/www.platinumracingproducts.com\/en-us\/products\/radium-pcv-fluid-lock-catch-can-kit-subaru-wrx-vb-22","provider":"Platinum Racing Products","version":"1.0","type":"link"}