Radium Crankcase Vent To Atmosphere Catch Can Kit - Mitsubishi Evo X
This kit is not a direct bolt-on and requires welding.
The 20-0181 Crankcase VTA Catch Can Kit is an open (vent to atmosphere) system used for high flowing, high horsepower applications. The closed system options listed above are adequate for most modified street vehicles. However, some loosely built race engines operate with a large amount of boost pressure and the OEM hoses can become too restrictive for the excessive blow by. This VTA kit replaces the stock hoses and valve cover fitting with -10AN hose (5/8" ID) and allows the gasses to vent through the catch can to the atmosphere. The stock PCV valve is capped and not used (caps provided) in this kit.
This kit is not a direct bolt-on and requires welding. In order to utilize the included -10AN hose, a 2008-2009 Mitsubishi EVO X aluminum valve cover MUST be used. The included -10AN male bung must be welded onto the valve cover at the location of the OEM crankcase vent fitting, as shown below.
The 2010+ valve cover is plastic and cannot be used for this kit. Like the EVO X crankcase systems above, this crankcase VTA kit mounts the catch can behind the LH headlight so there must be room for the included breather filter (shown above). Consider purchasing 20-0300 Alternate Location Mount separately.
Kit Includes:
- Billet oil catch can with integrated condenser and dipstick
- Laser cut powder coated LH mounting bracket
- Enough -10AN (5/8") black PCV hose for all applications
- Radium 14-0136 -10AN Hose End, 2pc 90deg for push-lok hose
- Radium 14-0213 -10AN Hose End, 90deg push-lok hose end
- Radium 20-0050 barb fitting with air filter breather
- 10AN male aluminum weld-on bung
- Vacuum caps for 1/2" and 3/8" barbs
- Stainless steel mounting hardware