Skip to content
CONTACT SALES: +61 2 5500 7523
CONTACT SALES: +61 2 5500 7523
High Mount V-band Turbo Manifold to suit Nissan SR20

High Mount V-band Turbo Manifold to suit Nissan SR20

by Artec
SKU SR20-VBAND-EX
32,310.21 ฿ - 35,772.02 ฿
32,310.21 ฿
32,310.21 ฿ - 35,772.02 ฿
32,310.21 ฿
MAKE IT A KIT
PRP x Turbosmart Gen V Wastegate 50MM ProGate50 14psi
PRP x Turbosmart Gen V Wastegate 50MM ProGate50 14psi
16,783.54 ฿
Prp X Turbosmart Gen V Wastegate 50mm Progate50 14psi
PRP Pro Series Titanium Exhaust Manifold Stud Kit - Toyota 1JZ/2JZ
PRP Pro Series Titanium Exhaust Manifold Stud Kit - Toyota 1JZ/2JZ
5,458.12 ฿
Prp Pro Series Titanium Exhaust Manifold Stud Kit - Toyota 1jz/2jz
**AVAILABLE NOW**

The new Artec Performance SR20 V-Band high mount manifold is available now!

Made from cast stainless 347 steel, this manifold will out-perform its competitors as it has a uniquely designed 50-55mm V-Band flange that can accommodate many different turbochargers without without having to change the turbo flange. This is accomplished by using one of the supplied turbo specific Artec locating rings to create a perfect V-band fit. This manifold suits standard rotation V-band Outlet Turbochargers and can accept up to a G35-1050 or PTE6870.

Youtube sensation Adam_LZ has just fitted one of these Artec Manifolds to his new Green Nissan S15 with a G25-550 and has had outstanding results. Artec Manifolds use high response 33mm ID runners and are machined to accept any of the commonly available 44mm, 45mm or 46mm wastegates. The manifold design allows for easy oil feed and drain lines as well as easy plumb back or vent to air for the wastegate.

Artec has truly revolutionised the turbo manifold industry with their unique cast 347 stainless manifolds, all manifolds are tuned and CFD simulated to achieve maximum flow and heat dispersion, whilst at the same time removing restrictions caused by tight radius bends in factory manifolds which therefor increases exhaust gas flow exponentially. Say goodbye to heat pooling, cracked manifolds and unequal exhaust gas distribution and say hello to a product which is designed and tested in Australia and is backed by a lifetime warranty!

All Artec manifolds are guaranteed to fit your engine bay and auxiliaries without headache or fuss and are designed to be installed in approximately 10 minutes. The bolt locations are easily accessible as the cast was designed around them for ease of installation and accessibility. Artec stainless manifolds are the unrivalled in their simplicity and efficiency!

  • Wastegate provision to suit BOTH 45mm and 44mm Turbosmart, Precision, Forge or Tial wastegates.
  • Turbo V-Band Flange to suit BOTH 50mm - 55mm Garrett, Precision, Borg Warner or Tial rear housings.

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
0%
(0)
100%
(1)
0%
(0)
C
Christian

Got the part but the wait time was 7weeks when the part was in stock in the same state of delivery