{"product_id":"radium-fuel-surge-tank-install-kit-mitsubishi-evo-x","title":"Radium Fuel Surge Tank Install Kit - Mitsubishi Evo X","description":"\u003ch2\u003eRadium Fuel Surge Tank Install Kit — Mitsubishi Lancer Evolution X\u003c\/h2\u003e\n\n\u003cp\u003eThis comprehensive installation kit includes everything needed to install a Radium Engineering single-pump fuel surge tank (FST) in the Mitsubishi Lancer Evolution X. Compatible with Walbro, AEM, Aeromotive, Deatschwerks, and Bosch equipped FSTs. \u003cstrong\u003eNot designed for use with the Radium MPFST.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe kit locates the FST in a collision-safe area, centred behind the rear seat and in front of the plastic panelling in the boot — retaining 100% of useable boot space as the panel reinstalls after fitment. The powdercoated aluminium bracket secures to OEM mounting bosses with no drilling or cutting required. The OEM battery and windshield washer fluid bottle are fully retained and do not need to be relocated.\u003c\/p\u003e\n\n\u003cp\u003eFour pre-assembled 6AN PTFE hoses are included, cut to length specifically for this application and integrated with the OEM fuel lines. PTFE hose is non-permeable, eliminating fuel vapour smell in the cabin, and is ideal for high alcohol content fuels including E85. Hose ends are anodized aluminium with an inner stainless steel braid covered in black PVC for abrasion and debris protection.\u003c\/p\u003e\n\n\u003cp\u003eWiring components include a weatherproof fuse and relay to drive the FST fuel pump. Assembly takes less than 30 minutes and requires no soldering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMitsubishi Lancer Evolution X — single-pump FST installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4x Pre-assembled 3\/8\" (6AN) PTFE hoses (cut to length)\u003c\/li\u003e\n  \u003cli\u003ePowdercoated aluminium mounting bracket\u003c\/li\u003e\n  \u003cli\u003eAN and OEM-style adapter fittings\u003c\/li\u003e\n  \u003cli\u003eStainless steel hardware\u003c\/li\u003e\n  \u003cli\u003eWiring components with relay and weatherproof fuse\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual pump FST:\u003c\/strong\u003e This kit supports a single pump only. For dual-pump FSTs, a DIY wiring harness and additional PTFE hose to the fuel rail will be required — contact Radium for details.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFST-R:\u003c\/strong\u003e If using a Radium FST-R, the plumbing in this kit is designed to reuse the OEM Mitsubishi FPR. One hose in the kit will not be used, and the OEM 1\/4\" rubber FPR return hose will need to be removed, drained, or plugged. The FPR vacuum hose will also need to be extended to the boot.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM return port restriction:\u003c\/strong\u003e Due to the restrictive return port on the OEM fuel pump housing, slightly elevated static fuel pressure is normal when using a high-flow pump. The OEM housing return port can be enlarged to alleviate this restriction — refer to the instruction manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eAvailable Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20-0113 — Fuel Surge Tank Install Kit, Mitsubishi Lancer Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr style=\"margin: 20px 0; border: 0; border-top: 1px solid #000;\"\u003e\n\n\u003ch3\u003eWhy Radium Engineering?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e✅ Manufactured in the USA to motorsport-grade tolerances\u003c\/li\u003e\n  \u003cli\u003e✅ Pre-assembled PTFE hoses with anodized aluminium ends and stainless steel braid — E85 and alcohol compliant\u003c\/li\u003e\n  \u003cli\u003e✅ Trusted by tuners and race teams running high-power Evo X builds worldwide\u003c\/li\u003e\n  \u003cli\u003e✅ Bolt-on fitment to OEM mounting bosses — no drilling, cutting, or battery\/washer bottle relocation\u003c\/li\u003e\n  \u003cli\u003e✅ Plug-and-play wiring with relay and weatherproof fuse — under 30 minutes, no soldering required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":48591120793832,"sku":"20-0113","price":1941.88,"currency_code":"SAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0354\/8135\/4376\/files\/20-0113_4307668d-d317-4763-af1c-b016ed09574a.jpg?v=1779943950","url":"https:\/\/www.platinumracingproducts.com\/en-sa\/products\/radium-fuel-surge-tank-install-kit-mitsubishi-evo-x","provider":"Platinum Racing Products","version":"1.0","type":"link"}