• larger internal fillet and reinforced skirt.
  • Increased rigidity increases both camshaft and bucket longevity.
  • DLC coated follower surface decrease friction
  • Decreases surface wear and oil temps
  • Improves torque required to turn the camshaft.
     

    Available in 2.78mm,3.0mm,3.50mm,3.78mm, 5.25mm, 6.15mm and 6.40mm ‘shim’ thickness options
     
    Disclaimer: Installation by a qualified tradesperson is strongly recommended. These cam followers are not a drop in solution.

    Note: There is a fixed internal length for each part number. Setting valve clearance (Lash) is required by adjusting valve tip heights, seat cut depth and camshaft base circle size.