Radium Engineering Fuel Pump Hanger — Mitsubishi Evo 7-9
The Radium Engineering Fuel Pump Hanger is a precision-engineered drop-in replacement for the OEM hold-down flange in the Mitsubishi Lancer Evolution 7, 8, and 9 fuel tank. Designed for high-power builds that demand reliable, high-volume fuel delivery, this hanger supports single or dual aftermarket pump configurations without cutting, welding, or modifying the factory tank.
Built from anodized billet aluminum and stainless steel hardware, every component is engineered to withstand continuous submersion in standard and exotic fuels — including E85, methanol blends, and race-spec formulations.
Why the OEM Hanger Fails at High Power
The factory Evo 8-9 fuel pump hanger is a known restriction point in high-output builds. Its venturi jet pump and return port become critically restrictive when paired with high-flow aftermarket pumps, creating excessive backpressure in the regulator return line and causing fuel rail pressure to spike unpredictably. The Radium hanger solves this with an upgraded venturi jet pump featuring an integrated pressure-relief valve — eliminating backpressure and keeping the OEM baffle full for starvation-free operation under hard cornering, acceleration, and braking.
Plumbing & Fitment
The hanger features a single 8AN male pump feed port and a 6AN male return port for clean, direct aftermarket AN plumbing. OEM fuel line adapter fittings are also included for builds retaining factory lines. All returning fuel from the pressure regulator and crossover hose exits through the jet pump, keeping the OEM baffle full for consistent fuel pickup.
Electrical System
Custom-designed stainless electrical studs handle the high current demands of modern high-flow pumps — a critical upgrade over compact bulkhead connectors that are prone to resistance and heat buildup. All connections are properly sealed and chemically resistant. In-tank wiring is insulated with PTFE for long-term durability. Nonconductive acorn nuts are included to prevent accidental short circuits. Electrical hardware is provided for both fuel pump(s) and the OEM level sender.
Note: Single pump applications can reuse OEM fuel pump controller wiring, however upgrading to a larger gauge wiring kit is strongly recommended to handle the additional current draw of high-flow pumps.
Pump Compatibility
Select your variant based on the pump(s) you are running:
20-1342 — Walbro Ti Automotive F90000267 / F90000274 / F90000285 / F90000295 — High-flow 450lph class pumps for serious power builds
20-1340 — Walbro GSS342 / AEM 50-1200 / AEM 50-1220 — Proven 255lph class pumps for street and moderate track builds
If supplying your own pumps, select the appropriate variant for your pump model. The kit includes enough components for 1 or 2 fuel pumps — unused parts simply won't be installed. A pliable fuel pump filter sock must be used for proper fitment. When pumps are included, 65-micron sock filters are pre-installed. A low-micron aftermarket inline fuel filter should always be installed downstream to protect injectors.
20-0376-0X — Fuel Hanger Plumbing Kit, Evo 8-9
Includes everything required to connect directly to an aftermarket -8AN male fuel rail and -6AN male FPR for both single and dual pump configurations. Features a pre-made PTFE -8AN feed line from the hanger to the engine bay, and re-uses the factory feed line as the regulator return line. Includes the necessary post-pump inline fuel filter.
We endeavour to ship all regular and stocked items on same day, next day or within 5 business days of your order being placed
Custom orders may take longer than regular shipping times but will have information about shipping time on the listing
We take extra care in packaging your orders to ensure you quality parts arrive safely
PRP accepts no responsibility for damage or loss to items/products/services from courier or shipping companies once we have received receipt for the third-party service
All Items purchased from PRP are to be installed by a qualified mechanic at a licensed workshop
Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy
PRP assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use, as all our products are intended for track use only
Refund requests will be reviewed case by case. Due to numerous factors including automatic & immediate 3rd party supplier purchase orders & merchant fees imposed on us, you might be liable to cover an unavoidable restocking/cancellation fee of ≥ 5%. Please review your purchase and consider contacting us for an ETA before placing an order. If your order is for a gearbox, specific turbocharger, engine build, manifold or something generally not in our extensive inventory, this restocking fee is based on the supplier and not dictated by PRP.
Effective September 2024, refunds will not be provided for change of mind, incorrect choice or custom ordered products.
Exchanges or refunds for items and customers that are categorized and applicable under the Australian Consumer law, requires the product/s remain unused and returned in original packaging in saleable condition at your expense to our HQ in Australia. They must return in reasonable time. PRP justifies reasonable to 60 days from date of purchase.
If items are damaged due to courier or otherwise neglect outside of your or PRP's control, you must notify PRP within 14 days of receipt or the claim is void.
Platinum Racing Products is not liable for refunds or replacements due to lost or stolen property. We will however attempt every effort to assist in the recovery of your goods.
We reserve the right to offer you a full or partial refund which can be applied over staged or full payment/s within a 30 day period.
You agree that if you select "Authority to Leave" or similar, you waive the liability from the shipper (as per their line agreement) and Platinum Racing Products. As such, we strongly suggest sending your package to an address where someone will be available to sign for the goods and keep them secure.
Anodizing is done in house with state of the art equipment and we hold stock of most popular colour's. We anodize generally within 48hrs. No refund nor partial will be provided if your request is inside the 48hr period and you require urgent parts however we will always do our best to meet your needs.
There is no partial or full refunds on shipping where factors are outside of PRP's control. Any shipping estimates are to be considered estimates only.
Silicone Hose Kits: Please note that our silicone hoses have been designed and tested for the vehicle models mentioned. They may fit other vehicles with the same engine model, however the purchase and installation is at your own risk. Due to extensive model changes throughout the years, we are unable to supply or customize hoses in alternative lengths or sizes beyond what is offered. The kits might not contain every hose you want, but we have made every effort to include the series changes to cover the majority of needs. This means we might include hose/s that don't suit your series as a bonus. We strongly advise that you carefully review all photographs provided before making your purchase. PRP does not offer refunds or partial refunds for hoses that are not included in the kit unless they are explicitly shown in the photographs and missing from your delivery.
Warranty Policy
Warranty is for a full refund or exchange provided the item was purchased through PRP or one its approved resellers or workshops.
Warranty is void if you tamper with products or bring them back in a different state to which they were sold to you.
Warranty does NOT cover costs of shipping to and from in any circumstance.
All Items/Products/Services purchased from Platinum Racing Products are to be installed by a qualified mechanic at an approved workshop and ALL warranty claims are dependent on proof of appropriate installation and verification of failure.
Modifying your vehicle is illegal in some states and territories, the customer acknowledges that it is their responsibility to abide by the law and take the appropriate measures to ensure that their vehicle is roadworthy.
Platinum Racing Products assumes no responsibility for any work carried out, modifications made or parts supplied with regards to road use. All our products are sold and intended for track use only.
Lifetime warranty refers to certain Platinum Racing Products branded components and generally does not include 3rd party suppliers and their parts. Manufacturer warranty applies to items including but not limited to alternators, turbochargers, electrical sensors, ECUs and associated parts, tyres, etc.
Due to customer and external components not supplied by PRP, flat drive oil pumps and components are limited to 1 yr warranty with specific cases reviewed before honoring. Spline drive will remain to have lifetime warranty, but again only after specific review.
All refunds and warranty claims are based on back to base review and parts will need to be returned to HQ for assessment unless otherwise arranged.
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.
